P287C
Transmission Adaptive Values Not Learned
P287C means the transmission controller finds its trim or adaptation data missing, invalid or unfinished. GM's 2023 Corvette dual-clutch TCM runs the check at initialisation, covering end-of-line and online values such as clutch preload, kiss point, fill volume, rod and parking lock positions, and learn routines left incomplete; the code is Type C, without MIL. Honda and Acura describe a trap on the 9-speed automatic of the 2015-16 TLX, 2016 MDX and 2016 Pilot: a replacement TCM arrives without trim data, sets P287C at each ignition cycle and then refuses the teach-in; clearing the code without cycling the key lets the procedure run. Mercedes lists P287C00 for the 8G-DCT as an unfinished first start-up of the transmission unit, and Ford's TR9070 summary as a learn data fault.
Possible causes
- Replacement TCM installed without trim or learn data high
- Initial start-up or learn routine not completed medium
- Stored data rejected after a software update medium
- Memory fault inside the control unit low
Symptoms
- Rough or inconsistent shifts after TCM work
- Learn or teach-in procedure refused
- Transmission warning, often without MIL
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P287C
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.
Sources
- gsi.ext.gm.com/gmspo/mode6/pdf/2023/23OBDG07.pdf
- static.nhtsa.gov/odi/tsbs/2016/MC-10211621-9999.pdf
- static.nhtsa.gov/odi/tsbs/2016/MC-10211620-9999.pdf
- static.nhtsa.gov/odi/tsbs/2025/MC-11022045-0001.pdf
- fordservicecontent.com/Ford_Content/catalog/motorcraft/OBDSM2400OUTPUT_16Jul2024_WSM_final_V2_MCS7001.pdf