OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2879

Clutch B Performance/Stuck Disengaged

P2879 is set when clutch B does not reach the torque it is asked for, or stays open altogether, so a large speed difference remains across it. No manufacturer publishes a test written for P2879. Mitsubishi shows the method on the clutch A sibling P2871 of the 2023 Outlander PHEV: once parallel mode has run for 2 s, the PHEV-ECU counts phases in which input and output differ by at least 75 rpm over 2 s, and the eighth such phase sets the code with MIL. Ford's 2012 DPS6 summary files the matching clutch B motor fault as P07A4, functionally stuck off; there clutch B drives reverse and the even gears. A car with this fault may refuse reverse, skip 2nd, 4th and 6th or flare without pulling. Worn linings, low apply pressure, a failed actuator motor and wiring faults are the usual suspects.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number8 / 79

Possible causes

  • Worn or glazed clutch B slipping under load high
  • Insufficient apply pressure from valve body, pump or regulator medium
  • Clutch B actuator motor or its drive failed medium
  • Wiring fault or control unit not commanding the clutch low

Symptoms

  • Reverse or even gears missing
  • Engine speed rises without thrust
  • MIL and limp mode

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P2879

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication