OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2877

Clutch B Disengagement Time Performance/Too Slow

P2877 means clutch B releases too slowly after the command to open. While it lingers, the outgoing clutch fights the incoming one, so shifts out of even gears and reverse feel heavy, the car may shudder or the engine can be pulled down at a stop. Ford includes P2877 as an MIL code in its 2014 diagnostic code list. In Ford's PowerShift (DPS6) design clutch B serves reverse and the even gears, and each dry clutch is returned to the open position by a spring once its electric actuator motor is switched off, so a slow release points to that mechanism or to clutch wear. Beyond that no manufacturer publishes detection criteria, and CARB 13 CCR 1968.2 provides the legal basis. On wet systems check the vent path of the clutch valve.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number8 / 77

Possible causes

  • Clutch B actuator or return spring not opening the clutch quickly high
  • Clutch B wear or glazing changing the release behaviour medium
  • Restricted vent path on wet-clutch systems low

Symptoms

  • Heavy or shuddering shifts out of even gears and reverse
  • Engine pulled down or stalling at a stop
  • MIL on

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P2877

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication