P2876
Clutch B Engagement Time Too Fast
P2876 flags clutch B closing faster than its programmed fill and apply profile allows. Instead of a smooth handover the clutch grabs abruptly, which is often noticed as a knock when selecting reverse or when a dual-clutch box shifts into an even gear. No public manufacturer document describes P2876. CARB 13 CCR 1968.2 demands functional checks of transmission control outputs, while the Corvette transmission software GM published for 2023 shows how a module compares clutch behaviour with an internal model to catch such deviations. Possible reasons are pressure overshoot from a sticking solenoid, adaptation values that do not suit new clutch linings after a repair, a timing error in the sensor signal, or a calibration fault in the software.
Possible causes
- Adaptation values not relearned after clutch or mechatronic work high
- Clutch B solenoid overshooting its target pressure medium
- Software calibration fault in the control unit low
Symptoms
- Knock when engaging reverse or even gears
- Abrupt, harsh shifts
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P2876
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.