OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2875

Clutch B Engagement Time Performance/Too Slow

P2875 tells that clutch B takes too long to grip once the control unit has asked for it. Slow filling leaves a gap in drive during shifts into the gears served by clutch B, with a flare of engine speed before the clutch finally holds. No manufacturer explains P2875 in a public document; the requirement for functional monitoring comes from CARB 13 CCR 1968.2. Comparable timing logic is visible in Volvo's rear-axle clutch, which reports slow coupling as P286D00, and in Mitsubishi's Mirage CVT, which waits 2 s for the second auxiliary ratio before flagging P2858. Typical root causes are low or aerated fluid, a partly blocked filter or valve passage, worn seals that leak during fill, or an actuator motor that has lost speed.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number8 / 75

Possible causes

  • Low or aerated fluid slowing the fill of clutch B high
  • Partly blocked filter or valve passage medium
  • Worn seals leaking while the clutch fills medium
  • Electric clutch actuator running slowly low

Symptoms

  • Delayed shifts into even gears with engine flare
  • Noticeable pause in drive during shifts
  • Warning lamp

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P2875

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication