P2872
Clutch A Stuck Engaged
P2872 is set when clutch A stays closed although it should be open. Mitsubishi's 2023 Outlander PHEV uses it for the engine clutch in the front transaxle: in EV mode, or in series mode where an open clutch would leave a large speed gap, the front motor turns at 750 rpm or more, yet input and output of the clutch differ by 8 rpm or less for 3.5 s. Both the hybrid warning and the MIL come on. In the workshop the front wheels are lifted and turned by hand; if the crankshaft pulley rotates with them, the transaxle is replaced, and a failed pressure test leads to a new valve body. Ford also lists P2872 as an MIL code. A clutch stuck closed drags the engine along, can stall it at a stop and loads the driveline.
Possible causes
- Clutch A plates seized or welded together high
- Foreign material holding the proportional valve in the apply position medium
- Control unit commanding or reading clutch state incorrectly low
Symptoms
- Engine turns with the wheels in EV mode, unusual noise or drag
- Engine stalls when the vehicle stops
- Hybrid system warning and MIL
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P2872
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.