OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2870

Clutch A Disengagement Time Too Fast

P2870 flags clutch A opening faster than the control unit intended. During a shift the outgoing clutch has to pass torque smoothly to the incoming one; if it lets go too early, engine speed flares and the shift feels like a slip followed by a thump. No manufacturer publicly documents P2870. CARB 13 CCR 1968.2 is the basis, and GM's 2023 Corvette dual-clutch software shows that clutch pressure is compared with a model throughout operation, so deviations in either direction can be caught. Typical triggers are a leaking piston seal, a pressure control valve that dumps oil too quickly, unsuitable adaptation values or low fluid, any of which shortens the release ramp. The transmission often reacts with firmer, slower shift programs.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number8 / 70

Possible causes

  • Leaking clutch A piston seal letting pressure drop too fast medium
  • Pressure control valve venting faster than commanded medium
  • Adaptation values not suited to the current clutch condition medium
  • Low fluid level low

Symptoms

  • Engine flare during shifts, then a thump
  • Firmer substitute shift program

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P2870

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication