P286E
Clutch A Engagement Time Too Fast
P286E is the opposite of P286D: clutch A reaches its engaged state sooner than the control unit expects. An overly quick engagement usually means the fill phase is being skipped, because the piston was already partly applied, the pressure control overshoots or adaptation values are too aggressive; the driver feels a bang on take-off or during shifts. No manufacturer documents P286E in a public source. CARB 13 CCR 1968.2 requires functional checks of transmission controls, and Mitsubishi's monitoring of the Outlander PHEV engine clutch shows how engagement can be judged from the speed difference across the clutch, which collapses to almost zero once it has closed. A software update or relearn comes first, followed by checks of the valve body.
Possible causes
- Clutch adaptation values too aggressive or not matched to new parts high
- Pressure control overshooting due to a sticking solenoid medium
- Clutch piston not fully retracted before the next apply low
Symptoms
- Bang or jerk when clutch A engages
- Harsh take-off from standstill
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P286E
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.