OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P286C

Clutch A Pressure Disengagement Too High

P286C sets when clutch A still holds too much pressure while it is supposed to open. The residual force keeps the clutch dragging, so in a dual-clutch or planetary layout two power paths can briefly work against each other; the result is shudder, a braking feel during shifts or creeping with neutral selected. No manufacturer publishes a strategy for this exact code. CARB 13 CCR 1968.2 still expects transmission outputs to be checked for function, and GM's 2023 Corvette table illustrates the principle by watching the hold pressure of an open clutch, reported there as P2855 or P2856. Likely sources are a slow-draining or stuck valve, a blocked exhaust port in the valve body or an offset in the pressure sensor.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number8 / 6C

Possible causes

  • Valve or exhaust passage for clutch A not venting fully high
  • Debris or clutch material in the valve body medium
  • Pressure sensor showing residual pressure that is not real low

Symptoms

  • Shudder or binding during shifts
  • Vehicle creeps or feels braked in neutral
  • Clutch overheating warning possible

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P286C

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication