P2869
Shift Fork E Stuck
P2869 states that fork E does not follow its commands: a gear on that fork cannot be engaged or released, although the position input itself may be working. No manufacturer publishes a strategy for P2869; the basis is the CARB 13 CCR 1968.2 requirement to check transmission components for function. The only public method for a fifth rod comes from GM's 2023 Corvette table. There an intrusive integrity routine pushes rod 5 both ways via synchronizer valve 5 and expects more than 100 µm of movement; if nothing moves, GM decides between sensor and valve with a current profile test of the valve and records the sensor fault under P2864, while valve 5 circuit faults use P27D5 to P27D8. Typical causes are a seized rod, a broken fork or a jammed synchronizer.
Possible causes
- Fork E rod seized in its bore or blocked by debris medium
- Actuator or hydraulic valve of fork E not moving the rod medium
- Synchronizer or sleeve of fork E jammed or broken low
Symptoms
- One gear stays engaged or cannot be selected
- Transmission emergency mode, warning lamp
- Grinding or clunking from the gearbox
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P2869
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.