P2868
Shift Fork E Position Sensor Incorrect Neutral Position Indicated
P2868 concerns the neutral information from the fork E sensor. The signal is electrically valid, but the module judges that the neutral it shows does not fit the real state of the fifth fork, either neutral claimed while a gear on that fork transmits drive, or a fork that seems engaged where neutral has been commanded. No manufacturer documents P2868 publicly. GM's Corvette software, the one published strategy with a fifth rod, compares an unloaded rod 5 with its learned neutral and engaged bands but books deviations under the consistency code P2864; the Mercedes 8G-DCT fork E entries do not include this number either. Monitoring of this input is still demanded by CARB 13 CCR 1968.2. Lost learned values and a shifted sensor magnet are the usual suspects.
Possible causes
- Learned neutral of fork E lost after module swap or repair high
- Magnet or target on the fork E rod displaced medium
- Worn detent or bent fork moving the rest position low
Symptoms
- Gears served by fork E refused
- Gear display does not match the gear actually engaged
- Warning lamp with limp-home program
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P2868
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.