P2860
Shift Fork B Actuator Performance
P2860 says the fork B actuator is electrically present but underperforms: travel takes too long, the target position is missed, or the effort needed to move it is out of line with what the module expects. No maker has published how it detects P2860. In the Ford code catalogue of 2014 it carries only the wrench symbol, so Ford treats it as a drivability fault without MIL, and in the DPS6 summary a jammed motor on the even-gear drum is booked under P2837 instead. CARB 13 CCR 1968.2 still requires functional checks of transmission actuators. On a vehicle that stores P2860, look at the mechanical side first: a stiff drum or fork, contamination in the selector track, or a motor whose brushes or bearings are worn.
Possible causes
- Stiff shift drum, rod or fork B medium
- Fork B actuator motor with worn bearings or brushes medium
- Debris or wear in the selector track low
Symptoms
- Delayed engagement of reverse or the even gears
- Wrench lamp or gearbox message, engine lamp off
- Clunk or shudder during upshifts to 2nd, 4th or 6th
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P2860
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.