P285C
Shift Fork A Actuator Performance
P285C is the functional counterpart to the electrical fork A actuator codes. The circuit may be intact, yet the actuator does not achieve what it is asked to do: it moves too slowly, draws an unexpected current or leaves the fork short of its target. No manufacturer publishes a detection strategy for P285C. Ford's 2014 code catalogue lists it under the wrench lamp column only, not the MIL column, and Ford's DPS6 description routes a blocked drum motor into the position error P2832 rather than into this code. CARB 13 CCR 1968.2 nevertheless asks for functional monitoring of transmission outputs. Possible causes are a sluggish motor, a binding drum or rod, and worn reduction gearing. Expect harsh or slow changes into the gears served by fork A.
Possible causes
- Worn or sluggish fork A actuator motor medium
- Shift drum, rod or fork A binding mechanically medium
- Worn reduction gearing between motor and drum low
- Low supply voltage to the module during shifts low
Symptoms
- Slow or harsh shifts into the gears of fork A
- Wrench or transmission warning without engine lamp
- Occasional gear skipping or neutral moments
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P285C
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.