OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P285B

Shift Fork A Actuator Circuit/Open

P285B covers the electrical drive of the actuator that moves fork A, for designs where an electric motor rather than oil pressure shifts the gears. The module sets it when the output stage sees no load, typically a broken winding, a cut lead or a connector that has backed out. Ford documents the code for the DPS6 dual-clutch box of 2012: shift drum A, which positions the forks for 1st, 3rd and 5th, is turned by a three-phase motor geared 61.44:1 to the drum, and an open motor circuit is logged as P285B. Ford flags it for the MIL. Sibling faults on the same drum are split off: driver chip (P2831), hall sequence (P2835), short to ground (P285D), short to power (P285E) and lost drum position (P2832). Without drum A the odd gears cannot be selected.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number8 / 5B

Possible causes

  • Loose, corroded or backed-out connector at the fork A actuator motor high
  • Broken lead between transmission module and actuator motor medium
  • Open phase winding inside the actuator motor medium
  • Failed motor output stage in the transmission module low

Symptoms

  • Malfunction indicator lamp and transmission warning
  • First, third or fifth gear not available, car may only move in the even gears
  • Jerky starts or refusal to pull away

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P285B

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication