OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P285A

Clutch B Pressure Disengagement Performance/Too Low

With P285A the module reports a release-side pressure fault involving clutch B. Mitsubishi's Mirage CVT evaluates it while the auxiliary gearbox is commanded into its second stage: a ratio that remains within 10 % of the first stage (1.639–2.003) for 0.5 s, or that drops to 0.500 or below or climbs to 1.500 or above for 0.2 s, sets the code. On the Nissan Kicks and Versa the number carries extra weight: if it appears together with P0875, the fluid pressure switch D code, Nissan has the control valve replaced straight away without the belt inspection required for the other codes. In daily driving the car may refuse the upper stage, flare between shifts or drop into a limp program, while the lower stage often stays usable.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number8 / 5A

Possible causes

  • Defective control valve, especially when P0875 is stored at the same time high
  • Leak in the clutch B circuit preventing a clean handover medium
  • Faulty clutch pressure switch or its wiring low

Symptoms

  • Upper stage or even gears not available
  • Flare between shifts, then a hard engagement
  • Limp mode with warning lamp

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P285A

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication