OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2858

Clutch B Pressure Engagement Performance/Too Low

P2858 is the clutch B counterpart of P2857: the element that should close for the second stage never reaches the pressure needed to carry torque. In Mitsubishi's Mirage CVT the check runs while the auxiliary gearbox changes up to its second ratio; if the ratio still reads 2.232 or higher after at least 2 s, the TCM concludes the box is hanging in neutral between the stages. Nissan groups P2858 with further pressure and judder codes on the 2018–2021 Kicks and 2020–2021 Versa: the technician removes the control valve and inspects the belt, replacing the whole CVT if the belt shows slip marks and only the valve body if it does not. Expect hesitation, rising engine speed without matching acceleration and a fail-safe mode.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number8 / 58

Possible causes

  • Control valve unable to raise clutch B pressure high
  • Slip damage inside the transmission (belt, clutch B linings) medium
  • Fluid level or quality outside specification low

Symptoms

  • Second stage or even gears engage late or not at all
  • Engine revs rise at cruising speed, acceleration lags
  • Reduced power with warning lamp

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P2858

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication