OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2857

Clutch A Pressure Engagement Performance/Too Low

P2857 reports that clutch A did not build up enough holding force when the control unit asked it to engage, so the expected ratio or torque transfer never appeared. Mitsubishi documents it for the CVT with two-speed auxiliary gearbox fitted to Mirage and Mirage G4 models from 2014 to 2022: while that gearbox is shifted into its first ratio, a measured ratio of 2.232 or more for 2 s counts as a fault, provided the pedal is at least 7.8 % open, the engine turns 450 rpm or more and D or B is selected. Nissan lists the same number as a clutch A pressure fault on the Kicks and Versa CVT, and Mercedes-Benz uses it on the 8G-DCT when multidisk clutch 1 fails to close. Drivers typically notice slipping, a flaring engine on take-off or a reduced-power mode.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number8 / 57

Possible causes

  • Control valve (valve body) not delivering the commanded apply pressure to clutch A high
  • Worn clutch A linings or leaking piston seals medium
  • Low, aerated or aged transmission fluid medium

Symptoms

  • Engine speed flares on take-off without matching acceleration
  • Hesitation or reduced power, transmission emergency mode
  • Warning lamp with stored transmission code

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P2857

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication