OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2856

Clutch B Pressure Charge Performance

P2856 flags too much pressure at clutch B, the even-gear clutch in GM's and Ford's dual-clutch layouts. For the Corvette unit GM checks clutch 2 with the same high-side logic as clutch 1, including the hold-pressure case: an open clutch held at its standby pressure must not rise well above that point, because it would then pass torque while the other clutch is driving. A Type A code follows, and the even clutch recovery routine is requested. Ford's 2024 summary lists P2856 on the TR9070 for even clutch pressure above target. Both clutches carrying torque at once can make the car shudder or brake itself, so continuing on the odd gears with clutch B open is the likely fallback.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number8 / 56

Possible causes

  • Clutch B pressure control valve hanging in a high-pressure position high
  • Safety shutdown valve for clutch B not venting medium
  • Clutch B pressure sensor reading high within its range low

Symptoms

  • Shudder or binding during shifts
  • Even gears blocked, emergency program
  • Warning lamp

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P2856

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication