OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2855

Clutch A Pressure Charge Performance

P2855 points the other way from P2853: clutch A carries more pressure than the model calls for. GM's Corvette table for clutch 1 uses three paths, all Type A. The measured pressure sits above the model by more than a set difference long enough to be confirmed; the absolute gap grows too large with the reading on the high side; or, while the idle clutch is being held at its hold pressure, where it should pass no torque, the reading climbs more than about 1.2 bar above that level for 300 ms. GM calls this a pressure charge fault and requests the odd clutch recovery. Ford's 2024 TR9070 summary sets P2855 when odd clutch pressure exceeds target. Excess pressure makes the clutch drag or grab, giving harsh launches and possible binding.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number8 / 55

Possible causes

  • Clutch A pressure control valve sticking toward high output high
  • Excessive line pressure feeding the clutch circuit medium
  • Clutch adaptation values out of date after repair low

Symptoms

  • Harsh engagement or jerky creep from standstill
  • Drag felt as if the brakes were applied
  • Limp-home mode with warning lamp

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P2855

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication