OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2854

Clutch B Pressure Discharge Performance

P2854 is the even-side partner of P2853: the pressure sensor of clutch B reports less than the control model expects. In GM's Corvette software clutch 2 drives the even gears; the check uses the same logic as on clutch 1, with a modeled value above 1 bar facing a reading under 0.5 bar for 5 s, plus a second path that watches the absolute gap between model and sensor. Both lead to a Type A code and a recovery request for the even clutch. Ford's TR9070 summary of 2024 maps measured even clutch pressure below target to P2854. Because the dual-clutch box can still drive on the odd gears, the car usually stays mobile in a reduced mode, but shifts into second and the following even gears are lost.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number8 / 54

Possible causes

  • Clutch B pressure control valve restricted by debris or wear high
  • Seal leak in the clutch B feed or piston medium
  • Foamed or overheated fluid lowering effective pressure low

Symptoms

  • Even gears skipped, car runs in odd gears only
  • Slipping or flare on shifts into even gears
  • Transmission warning

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P2854

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication