P2852
Shift Fork Position Sensor C/D Correlation
P2852 pairs the position sensors of forks C and D and sets when their readings do not fit together. In GM's numbering these are rods 3 and 4, both on the even shaft and fed from the second sensor reference; a reference fault there would shift both signals together. No published OBD summary actually uses P2852: GM keeps rods 3 and 4 apart with P283C and P2841, and Ford's TR9070 lists consistency faults for shift rod sensors 3 and 4 in the same two codes. CARB 13 CCR 1968.2 is therefore the only basis. Diagnosis starts with the two signals in live data while each fork is moved by a scan-tool test; if both deviate in the same direction, wiring or supply is more likely than the sensors themselves.
Possible causes
- Reference voltage feeding the C and D sensors out of tolerance high
- Sensor C or D reporting a shifted value medium
- Input circuit fault in the transmission module low
Symptoms
- Gears of forks C and D unavailable
- Transmission fault message, reduced power
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P2852
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.