P2851
Shift Fork Position Sensor A/B Correlation
P2851 is meant for a plausibility comparison between the position sensors of forks A and B. Both readings may be in range on their own, yet together they describe an impossible state, such as both forks engaged at once, or they move in step in a way that points to a shared supply or ground fault. No maker publishes a strategy for this pair code. In GM's Corvette dual-clutch software, rods 1 and 2 on the odd shaft do share a sensor reference supply, but faults are kept per rod as P2832 and P2837; Ford's TR9070 likewise assigns one consistency code to each rod sensor. CARB 13 CCR 1968.2 requires the rationality check without prescribing the pair form. Expect the module to drop the odd or affected gears until the cause is found.
Possible causes
- Shared supply or ground of the A and B sensors disturbed high
- One of the two sensors drifting while still in range medium
- Corroded contacts at the internal transmission connector medium
Symptoms
- Gears of forks A and B locked out
- Warning lamp, limp-home mode
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P2851
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.