P284A
Shift Fork B Stuck
P284A is stored when fork B stays put although the transmission module commanded a move, for instance from neutral toward an engaged gear or back. Published strategies avoid this code. Ford's 2024 summary for the TR9070 dual-clutch box diagnoses the same symptom per gear rather than per fork, with failure-to-engage codes such as P073F and failure-to-disengage codes such as P072B, while GM's Corvette software folds a motionless rod into its position-sensor consistency checks. The CARB 13 CCR 1968.2 functional check of transmission components covers the case either way. For the driver, the gears carried by fork B disappear; if the fork hangs in an engaged gear, the module may have to drive around it on the other shaft. Inspection usually means opening the gearbox.
Possible causes
- Fork B actuator, solenoid or hydraulic supply failing to apply force high
- Synchronizer of fork B gears jammed or damaged medium
- Contaminated fluid restricting the fork B actuator low
Symptoms
- Gears of fork B missing or a gear stays engaged
- Warning lamp and emergency mode
- Rough starts or lack of drive in some gears
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P284A
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.