OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2848

Shift Fork D Position Sensor Incorrect Neutral Position Indicated

P2848 is the neutral-plausibility code for the fourth fork. It sets when the fork D sensor signal and the logical state of that fork disagree about neutral, even though the signal itself is electrically sound. None of the published strategies uses the number: Mercedes-Benz lists four separate fork D sensor faults for its 8G-DCT (724.1), from P284000 to P284300, but not this one; Ford's TR9070 summary routes a doubtful reading of shift rod sensor 4 into the consistency code P2841, and GM's Corvette table handles rod 4 the same way. CARB 13 CCR 1968.2 still expects the input to be monitored. In practice the box withholds the gears on fork D until a learn routine with a scan tool succeeds or a mechanical defect is fixed.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number8 / 48

Possible causes

  • Fork D positions not relearned after software update or repair high
  • Sensor of fork D loose in its mount medium
  • Wear on fork pads or synchronizer sleeve shifting the rest position low

Symptoms

  • Gears of fork D unavailable
  • Drive system warning, emergency program

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P2848

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication