P2847
Shift Fork C Position Sensor Incorrect Neutral Position Indicated
With P2847 the module has decided that the neutral signal from the fork C sensor cannot be trusted. Before a dual-clutch or automated manual box preselects a gear on a shaft, it must know that the other forks on that shaft are out; a false neutral could let two ratios mesh at once, so the module normally locks the affected gears out. No published manufacturer strategy uses P2847, so the code rests on the general CARB 13 CCR 1968.2 demand for plausible transmission inputs. In GM's Corvette software, the comparable static check for the third rod, which sits on the even shaft, is filed as P283C. Typical background: sensor or magnet moved during a transmission repair, positions never relearned, or a fork bent by a hard shift.
Possible causes
- Fork C sensor or magnet repositioned during transmission work without relearn high
- Fork C bent, so neutral lies outside the learned band medium
- Position sensor output drifting with temperature or age low
Symptoms
- Gears of fork C locked out, jumps between remaining ratios
- Warning lamp and stored transmission code
- Harsh or delayed shifts on the affected shaft
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P2847
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.