OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2846

Shift Fork B Position Sensor Incorrect Neutral Position Indicated

P2846 flags a mismatch between the neutral reading of the fork B position sensor and the gear state the transmission module expects. Either the sensor claims fork B rests in neutral while the shaft speeds prove its gear carries load, or it reports an engaged fork where the module has commanded neutral. No manufacturer publicly documents P2846. CARB 13 CCR 1968.2 requires transmission inputs to be checked for rationality, and GM's 2023 Corvette dual-clutch table shows one way to do it: an unloaded rod has to read within a tolerance band around the learned neutral or engaged point. GM books such deviations for its second rod under P2837, though. Likely triggers are lost learned positions, a loosened sensor target or a worn detent; a relearn comes first.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number8 / 46

Possible causes

  • Learned neutral position of fork B missing after repair or module replacement high
  • Magnet or target on the fork B rod loosened or shifted medium
  • Worn detent letting fork B settle off its neutral point low

Symptoms

  • Gears served by fork B refused or skipped
  • Transmission warning with reduced performance
  • Gear indicator disagrees with the actual gear

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P2846

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication