P2845
Shift Fork A Position Sensor Incorrect Neutral Position Indicated
P2845 means the fork A sensor reports neutral although the gearbox state says a gear is engaged, or it reports an engaged position where neutral is expected. Public manufacturer documentation for P2845 is lacking, and CARB 13 CCR 1968.2 only asks that transmission inputs be checked for plausibility. How such a check works is visible in GM's 2023 Corvette dual-clutch table: the module learns neutral and engaged positions for every rod and, with no shift force applied, expects the reading to stay inside tolerance bands around them, but it stores deviations under other codes. A shifted sensor magnet, a worn fork or lost learned values after a repair are likely triggers; a relearn with a scan tool is the first step, followed by a mechanical check.
Possible causes
- Neutral position not learned or lost after repair or software update high
- Sensor magnet or target shifted on the rod medium
- Worn fork or detent changing the neutral position low
Symptoms
- Gear display shows N while a gear is engaged, or the reverse
- Shifts refused, transmission in limp-home mode
- Warning lamp on
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P2845
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.