P2842
Shift Fork D Position Circuit Low
P2842 sets when the fork D sensor signal collapses toward zero. GM's 2023 Corvette table expects a pulse train from the rod 4 sensor and flags the circuit if pulses vanish with less than 2.0 V present, or if the duty cycle is lower than 8 %, both held for 150 ms; the resulting fault is Type A. In Ford's TR9070 summary the matching rod sensor 4 entry covers a too-narrow pulse and an input frozen at zero. Mercedes-Benz uses P284200 on the 8G-DCT for a fork D sensor shorted to ground. Since a missing sensor feed produces the same low picture, measure the 5 V supply at the connector first; on the Corvette that feed is shared with rod 3, so a combined P283D points to the supply rather than to one sensor.
Possible causes
- Fork D signal wire shorted to ground or housing high
- No 5 V feed reaching the sensor medium
- Fork D sensor internally failed medium
Symptoms
- Warning lamp, fork D gears blocked
- Transmission in emergency program
- Additional fork C code if the shared feed is at fault
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P2842
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.