OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2837

Shift Fork B Position Circuit Range/Performance

P2837 flags a fork B position reading that is electrically sound but contradicts the gearbox state. GM's Corvette summary from 2023 maps fork B to rod 2 on the odd-gear shaft. A Type A fault follows when the speed sensors confirm a gear under more than 600 N of shift force while the sensor sits over 1100 µm from the learned engaged point, and a second test catches a rod that hardly moves after a release command. Setting the code also starts a synchronizer recovery routine for the odd shaft. Ford's 2024 summary uses P2837 for the consistency test of TR9070 rod sensor 2 and keeps rod drift apart as P284E. For Mercedes-Benz it is a fork B sensor malfunction in the 8G-DCT; the DPS6 text from Ford (2012) reads it as a position error of the second drum, a blocked motor included.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number8 / 37

Possible causes

  • Learned rod 2 positions no longer matching after repair or wear high
  • Rod, fork or synchronizer binding so the gear does not engage or release cleanly medium
  • Sensor magnet or carrier loose on the rod medium
  • Blocked second shift drum motor (Ford DPS6) low

Symptoms

  • Gear jumps out or is not engaged on fork B
  • Noticeable pause or clunk while the gearbox retries the shift
  • Warning lamp and limited gear selection

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P2837

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication