P2836
Shift Fork B Position Circuit
P2836 is the umbrella circuit code for the shift fork B position input. Mercedes-Benz stores P283600 when its 8G-DCT dual-clutch transmission (724.1) detects an electrical defect at the fork B sensor and includes it in the code set evaluated by its Intelligent Predictive Repair routine in XENTRY. Ford's 2012 summary gives the number a different job on the DPS6 gearbox of Focus and Fiesta: a fault in the motor-current chip (ATIC) inside the TCM that drives the second shift drum, which according to its stuck-in-gear codes serves second, fourth, sixth and reverse. GM's Corvette software and Ford's TR9070 never use P2836 and report fork B problems through P2837 to P283A. Usually the gears moved by fork B are withdrawn and a substitute program takes over.
Possible causes
- Electrical defect in the fork B position sensor (Mercedes 8G-DCT) high
- Failed current-control chip for the second shift drum motor in the TCM (Ford DPS6) medium
- Corroded or loose contacts between sensor and module medium
Symptoms
- Transmission warning and stored code
- Gears of fork B skipped or unavailable
- Delayed engagement from Park or no drive (Ford DPS6)
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P2836
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.