P2832
Shift Fork A Position Circuit Range/Performance
P2832 means the fork A position reading is electrically valid but disagrees with what the gearbox is doing. GM's 2023 table for the Corvette dual-clutch box runs this as a consistency check on rod 1: when clutch shaft and output speeds prove a gear is engaged with over 600 N applied, yet the sensor sits more than 1100 µm away from the learned engaged position, a Type A fault follows a confirmation time; a matching test watches disengagement. Ford's 2024 summary lists P2832 as the consistency code of rod position sensor 1 on the TR9070. Mercedes-Benz names it a malfunction of the fork A sensor on the 8G-DCT, and Ford's 2012 DPS6 summary uses it for a position error of shift drum A, including a blocked motor.
Possible causes
- Sensor magnet or mounting shifted on the shift rod high
- Learned fork positions no longer valid after repair or wear medium
- Shift rod, fork or drum binding mechanically medium
Symptoms
- Gear on the odd shaft not engaged or dropped
- Clunks or long pauses during shifts
- Limp-home mode with warning lamp
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P2832
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.