OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2831

Shift Fork A Position Circuit

P2831 is the general circuit code for the position signal of shift fork A in automated manual and dual-clutch gearboxes. How makers fill it varies widely. Mercedes-Benz uses P283100 for an electrical fault of the shift fork A position sensor in the 8G-DCT (transmission 724.1) and lists it among the codes of its guided repair tool. Ford's 2012 summary for the DPS6 dual-clutch box of Fiesta and Focus has no fork sensor at all: there P2831 marks a fault in the internal TCM chip that sets the current of the shift drum A motor, the drum that moves the forks for first, third and fifth gear. GM and Ford's TR9070 split position circuit faults into the specific codes P2833 to P2835 instead. Gear changes on the affected shaft may be refused.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number8 / 31

Possible causes

  • Shift fork A position sensor electrically defective high
  • Fault in the module's motor current controller (Ford DPS6) medium
  • Poor contact at the sensor or module connector medium

Symptoms

  • Transmission warning, gear display may flash
  • Odd gears unavailable or limp-home mode
  • Delayed engagement or no drive when starting off

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P2831

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication