P282B
Pressure Control Solenoid K Electrical
P282B covers electrical faults at solenoid K when the module does not break them down into open, low or high. Mercedes-Benz uses P282B00 on the 8G-DCT (transmission 724.1) for an electrical fault of pressure regulating valve 10; its 2025 information LI27.00-P-077141 includes the code among those the IPR guided routine analyses before parts are replaced, while P282800 stands for a functional fault of that valve. GM, on the 2023 Corvette, instead reports K wiring faults separately as P282D, P282F and P2830. CARB 13 CCR 1968.2 forms the legal basis for monitoring such outputs. Typical findings are a broken coil winding, a damaged conductor inside the mechatronic unit or corrosion at the plug; drivers may notice rough engagement or a warning message.
Possible causes
- Broken coil winding in valve K medium
- Damaged internal conductor in the mechatronic unit medium
- Corrosion at the transmission plug low
Symptoms
- Rough clutch engagement
- Transmission warning or MIL
- Emergency mode
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P282B
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.