OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2829

Pressure Control Solenoid K Performance/Stuck Off

P2829 means valve K remains hydraulically inactive although it is commanded on. In GM's 2023 Corvette dual-clutch transmission K is the selector pilot valve, which steers the selector spool of the shift-rod hydraulics. The check runs inside a synchronizer integrity routine that starts after a gear or component fault: the TCM orders small rod movements and measures them. If the rods respond as though the selector were off (no more than 100 µm of intended travel, over 100 µm on the complementary rod) and the valve's current profile check fails three times, with cooler-out oil at 40 °C or warmer, the Type A code is stored. Ford handles the same selector pilot valve of its TR9070 under P27D9 rather than a K code. Gear selection on one shaft may be lost.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number8 / 29

Possible causes

  • Selector pilot valve stuck in the off position high
  • Abrasion particles in the transmission fluid medium
  • Selector spool itself stuck (same symptom, different part) low

Symptoms

  • Some gears unavailable
  • Hesitation or failed gear preselection
  • MIL on

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P2829

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication