OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2828

Pressure Control Solenoid K

P2828 serves as the catch-all code for solenoid K and is normally refined by a failure-type byte or replaced by one of P2829 to P2830. Mercedes-Benz is the maker found to name it directly: on the 8G-DCT dual-clutch gearbox of model series 118, 177 and 247, P282800 denotes a malfunction of pressure regulating valve 10 and P282B00 an electrical fault of the same valve. Both belong to the IPR routine in XENTRY Diagnosis, which Mercedes set up because many repairs on transmission 724.1 had not solved the complaint. GM uses K on the 2023 Corvette dual-clutch box for the selector pilot valve, but only with the specific codes. Since K may be a clutch, selector or cooling valve, effects range from rough shifts to missing gears.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number8 / 28

Possible causes

  • Valve K sticking because of contaminated fluid high
  • Fault in the mechatronic unit carrying valve K medium
  • Coil fault at valve K medium

Symptoms

  • Rough shifting or missing gears
  • Transmission warning or MIL
  • Emergency mode

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P2828

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication