OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2827

Pressure Control Solenoid J Control Circuit High

P2827 sets when the J control line shows supply voltage although the load ought to pull it low. In GM's 2020 tables it covers the nine-speed clutch valve, the ten-speed default disable valve and the eight-speed boost valve, using the same 0.3-of-0.5 s window and Type A rating as the low code. On the Corvette's 2023 dual-clutch unit, where J engages the park lock, the limit grows with battery voltage from about 0.7 to 1.1 V; this code also takes a current estimate that misses its target by more than 70 % (60 ms) or 200 mA (300 ms). A further check at shutdown looks for a short to the next output and raises it at the following key cycle; all of these are Type B. Ford files a shorted load at the TR9070 park lock valve here. Check for wires touching a supply line.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number8 / 27

Possible causes

  • Control wire shorted to a supply line high
  • Short to a neighbouring solenoid output medium
  • Moisture in the transmission connector medium
  • Shorted coil turns lowering the load low

Symptoms

  • Limp gear or blocked park lock function
  • Code returns right after a restart
  • MIL on

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P2827

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication