OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2823

Pressure Control Solenoid J Intermittent

P2823 is reserved for a fault at valve J that appears and disappears, either in its wiring or in its hydraulic action. No manufacturer publishes a description of this code. CARB 13 CCR 1968.2 obliges makers to monitor transmission output devices for circuit and functional faults, yet leaves it to them whether to split off intermittent codes. The systems that do use the J series show why such faults are elusive: GM's 2020 circuit tests need the flag in 0.3 of every 0.5 s, and the 2023 Corvette waits 150 ms before confirming a J fault, so very brief dropouts may never be logged and only appear as an odd shift or a park lock that reacts late. Read the freeze frame, flex the harness at the transmission plug with live data running and inspect pins for corrosion or spread contacts.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number8 / 23

Possible causes

  • Loose or spread pin at the transmission connector high
  • Harness rubbing through under vibration medium
  • Coil that drops out only when hot medium
  • Valve J sticking now and then due to contaminated fluid low

Symptoms

  • Occasional rough or unexpected shift
  • Warning that comes and goes
  • Sometimes delayed park lock response

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P2823

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication