OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2821

Pressure Control Solenoid J Stuck On

P2821 is the mirror image of P2820: valve J keeps acting after the module has released it. GM bulletin PIP5557 (revisions up to C) concerns 2018 Cruze, Equinox, Malibu and Traverse with nine-speed automatics (RPO M3D, M3E, M3H, M3U, M3V) that stay in second gear and will not pass about 30 mph. When the regular diagnosis finds nothing, the 0.5 mm orifice 33 in the spacer plate is checked against a light and the plate is replaced together with the TCM update from 18-NA-121. In the 2023 Corvette dual-clutch box J is the park lock engaging valve: below 3 km/h the TCM drains the lock piston through J alone, and if the position sensor keeps reporting the lock as released, the valve counts as stuck on (Type B). Ford's TR9070 puts the same fault of its park lock valve here.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number8 / 21

Possible causes

  • Blocked orifice in the valve body spacer plate high
  • Valve J or its spool stuck in the applied position medium
  • TCM software requiring the update released with the repair medium
  • Park lock piston or latching valve not draining (dual-clutch) low

Symptoms

  • Stuck in second gear, no upshift
  • Top speed limited to about 50 km/h
  • Park lock does not engage as expected
  • MIL on

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P2821

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication