OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2820

Pressure Control Solenoid J Performance/Stuck Off

P2820 says valve J, though electrically sound, fails to deliver its hydraulic effect when commanded. On GM ten-speed automatics J is the default disable valve; if it sticks off, the box drops into its hydraulic limp gear (2nd or 7th) while another gear is requested. GM's 2020 tables detect this through gear ratio and clutch slip (50 rpm) and log Type A after 0.25 s. GM PIP5551 blames casting debris or blocked spacer plate orifices on 2017-2018 Malibu with the GF9 nine-speed. Toyota maps P2820 to the SLP valve of the Corolla CVT; T-SB-0289-17 (2014-2017 Corolla, 2017 iM) and S-SB-0002-18 (2016 iM) swap the CVT and reflash the ECM. In the Corvette and Ford TR9070 dual-clutch boxes J holds the park lock, so a stuck-off valve leaves the car in Park.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number8 / 20

Possible causes

  • Casting debris or dirt blocking valve J or its passages high
  • Restricted orifice in a spacer plate medium
  • Outdated control logic that misjudges the valve (Toyota CVT) medium
  • Internal transmission damage requiring a replacement unit low

Symptoms

  • Transmission suddenly holds 2nd or 7th gear
  • Binding or jerky drive when the wrong clutches engage
  • Vehicle will not leave Park on dual-clutch models
  • MIL on

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P2820

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication