OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P281B

Pressure Control Solenoid H Control Circuit/Open

P281B stands for an open control circuit of solenoid H. GM's 2020 tables apply it to the converter clutch valve of nine- and ten-speed automatics and to the T93 eight-speed default valve; an impedance of about 200 kilohm, seen for 0.3 s of 0.5 s, sets a Type A fault in one trip. On the T87a eight-speed controllers an open default valve circuit is filed as P281D instead. In the 2023 Corvette dual-clutch box H is the redundant shutdown valve of the differential lock; with the output off, the driver tries to hold the pin low with a tiny current, and if it succeeds the load is missing, confirmed after 150 ms as Type B. Broken wires, a backed-out terminal or an open coil are the usual causes; converter lockup or the differential lock is then lost.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number8 / 1B

Possible causes

  • Open coil in solenoid H high
  • Terminal pushed back or loose in the connector medium
  • Broken wire in the internal or external transmission harness medium

Symptoms

  • MIL on after one trip
  • No converter clutch lockup, higher engine speed at cruise
  • Limited-slip differential disabled (Corvette dual-clutch)

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P281B

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication