OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2819

Pressure Control Solenoid H Electrical

P2819 is a collective electrical code for solenoid H: the module knows that coil or wiring is faulty but does not say whether the circuit is open or shorted. Mercedes-Benz uses it on the 8G-DCT dual-clutch gearbox (transmission 724.1 in the A-Class, CLA and GLA/GLB families): P281900, an electrical fault of pressure regulating valve 8, is one of the codes its guided diagnosis tool in XENTRY handles, alongside P281600 for a functional fault of the same valve. GM, by contrast, reports H circuit faults as separate codes P281B, P281D and P281E. CARB 13 CCR 1968.2 requires transmission output circuits to be checked for such faults. Measure coil resistance and the connection to the module before replacing the valve or the mechatronic unit.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number8 / 19

Possible causes

  • Coil of valve H open or shorted high
  • Poor contact between valve and mechatronic or module board medium
  • Damaged transmission wiring or connector medium

Symptoms

  • MIL or transmission warning on
  • Limp-home mode with restricted gears
  • Jerky starts or rough shifts

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P2819

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication