OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2810

Pressure Control Solenoid G Electrical

P2810 is a collective electrical code for solenoid G: the control unit sees a fault in coil or wiring but does not split it into open, low or high. No manufacturer documents P2810 publicly. The makers that do use valve G report electrical faults more precisely. GM's 2020 table lists the open circuit as P2812 with the ten-speed line pressure valve and the eight-speed converter clutch valve as G, and Ford's 2024 summary books the even clutch cooling valve of its TR9070 dual-clutch box under P2812, P2814 and P2815. CARB 13 CCR 1968.2 requires such output circuits to be monitored. If the code does appear, measure the coil resistance and check the connector and the supply from the module.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number8 / 10

Possible causes

  • Coil of solenoid G open or shorted internally high
  • Damaged internal harness or lead frame medium
  • Corroded or loose transmission connector medium
  • Faulty output stage in the control module low

Symptoms

  • MIL on and harsh shifts
  • Transmission in default pressure or limp mode

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P2810

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication