OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P280A

Transmission Range Sensor A Circuit Not Learned

P280A means the module holds no valid learned reference for range sensor A, so it cannot translate the raw signal into a reliable selector position. This is typical after replacing the sensor, the gearbox or the control module, after a software update, or when a learn run was aborted. No manufacturer documents this code publicly; CARB 13 CCR 1968.2 only requires that transmission inputs are checked. Why learning matters is shown by Ford's 2019 hybrid summary, which accepts each selector position only inside narrow voltage windows of the sensor, and by Audi bulletin 2051686, which calls for all basic settings after a new TCM and position sensor. A relearn with a scan tool is normally the fix. P280B is the B side.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number8 / 0A

Possible causes

  • Learn procedure skipped after replacing sensor, gearbox or module high
  • Learn run aborted, for example by low battery voltage medium
  • Learned values cleared by a software update medium
  • Sensor signal outside the learnable window low

Symptoms

  • Warning lamp right after a repair or update
  • Engine does not start or gear display missing

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P280A

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication