OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2804

Transmission Range Sensor B Circuit Intermittent

P2804 points to a B signal that drops out or jumps for short moments instead of failing permanently. Ford is the main user: its 2024 OBD summary books it as the general electrical fault of TRS B (UDS P2800_01), checked continuously, with up to 30 s allowed for pattern recognition and 2 s for analog faults. On 2020-2021 Transit vans, Ford's messages SSM 49242 and 49510 describe P2804 appearing with P2803, P0708, P0709, P0710 and P0713 and the MIL lit, and send technicians to four connectors to look for partial seating or pushed pins before any further diagnosis. The 2021 Bronco Sport bulletin 21-2331 lists it as well. Wiggle tests on the harness with the selector moved through all positions help to catch it.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number8 / 04

Possible causes

  • Connector not fully seated or pin pushed back high
  • Harness chafing that opens the circuit under vibration medium
  • Worn contacts or electronics inside the range sensor low

Symptoms

  • MIL comes and goes, often with several transmission codes
  • Gear display flickers
  • Occasional shift system warning

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2804

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication