P2802
Transmission Range Sensor B Circuit Low
P2802 means the B signal of the range sensor sits too low, usually a ground short or a duty cycle collapsing toward zero. GM's tables for 2020 and 2025 place the check in the engine module, which reads internal range sensor B on its own wire: a circuit impedance under 0.5 ohm to ground for 0.5 s within a one-second window sets the code as Type A, MIL in the first trip. Ford's 2024 summary sets it (P2800_84) on its six- and ten-speed automatics when the duty cycle drops below 8 %. Ford's hybrid sedans and the C-Max showed P2802 alongside P2800 once water had entered connectors (SSM 47790). P2803 is the high fault and P0707 the matching low fault of sensor A.
Possible causes
- Signal wire of sensor B shorted to ground high
- Water or corrosion in a connector of the circuit medium
- Range sensor output stage failed low medium
Symptoms
- MIL or wrench lamp on
- No start in Park, missing gear indication
- Stop-start or shift functions restricted
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2802
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.