P2800
Transmission Range Sensor B Circuit (PRNDL Input)
P2800 is the general circuit code for the second signal path that tells the modules which selector position (P, R, N, D, L) is engaged. It applies when that signal is unusable without a clear low, high or frequency pattern. Ford's 2019 hybrid OBD summary lists it for the eCVT range sensor with the wrench lamp and no MIL, judged in under a second; one section also sets it when the gear position message from the engine module over CAN is invalid. Ford's 2024 summary uses P2800 as the base number for its TRS B sub-faults. Ford message SSM 47790 ranks P2800 among the most frequent codes on Fusion, MKZ and C-Max hybrids built 2013-2019, caused by water or corrosion in several connectors. Sensor A has P0705.
Possible causes
- Water entry or corrosion in connectors along the sensor circuit high
- Chafed or broken wiring between sensor and module medium
- Failed transmission range sensor medium
- Invalid gear position message from another module over CAN low
Symptoms
- Wrench lamp or MIL on, gear display missing or wrong
- Engine does not start in Park or Neutral
- Trouble selecting a drive position
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2800
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.