P27F0
Transmission Range Control B Position Sensor/Switch Circuit Range/Performance
P27F0 checks whether mode valve B really moves. In GM's 2020 table for the T87A 10-speed RWD transmission, the TCM expects the valve B sensor to follow commands to park, reverse, neutral high or low, neutral shift and drive within a delay; if the final state is not reached under adequate line pressure, the Type A code sets. The electrical sensor codes P27EF, P27F1 and P27F2 must be clear for the test to run. In GM bulletin 21-NA-169, aimed at 9T45/50/60 automatics with under 19,000 km, P27F0 sits beside P27EC in the group where the valve body is replaced if the fluid looks healthy; dark, burnt fluid means the clutches need inspection too. Drivers notice delayed or refused range changes.
Possible causes
- Mode valve B sticking in the valve body high
- Insufficient line pressure to move the valve medium
- Position sensor B reporting late or wrong state low
Symptoms
- Delay or refusal when selecting neutral, drive or reverse
- MIL on, transmission may enter a protective mode
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P27F0
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.