P27EB
Transmission Range Control A Position Sensor/Switch Circuit/Open
GM uses this code on automatics with internal electronic range selection (ETRS), where hydraulic mode valves within the valve body set park, reverse, neutral and drive. Mode valve A carries a Hall position sensor. In the 2020 tables for the T87A 10-speed RWD unit, P27EB sets when the raw sensor voltage lands in an invalid band between 1.263 and 1.504 V, debounced at 0.100 s per 0.163 s window, with at least 9 V battery voltage; it is Type A, so the MIL lights on the first trip. Such a level fits neither valve state and usually means a broken signal wire or a failing sensor. Shorts are P27ED and P27EE, implausible movement P27EC; valve B has P27EF. Range changes may be limited until the cause is fixed.
Possible causes
- Signal wire of the mode valve A sensor broken or loose high
- Hall sensor on mode valve A failing medium
- Damaged internal transmission harness or pass-through connector medium
Symptoms
- MIL on after the first trip
- Range selection restricted or delayed
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P27EB
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.