P27EA
Transmission Range Control B Circuit High
With P27EA, a signal of range control circuit B reads near the supply voltage, which usually means a short to a power wire or a broken ground return that lets the line float high. No manufacturer documents the B code openly. Mitsubishi's channel A twin, P07EB, sets above 4.5 V on one of the eight sensors in the electric selector for 2.4 s and lists a short to power as cause; normal driving remains possible. A missing sensor ground produces the same picture as a short to battery, so check the ground pin before replacing the selector. In shift-by-wire systems a high reading on one channel is cross-checked against the remaining channels. P27E9 is the low counterpart, P27E7 the open circuit.
Possible causes
- Signal line shorted to a supply wire high
- Sensor ground open, signal floats high medium
- Selector electronics faulty low
Symptoms
- Shift system message in the cluster
- Car usually still drives normally
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P27EA
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.