P27E9
Transmission Range Control B Circuit Low
P27E9 reports that a line of range control circuit B sits too close to zero volts, pointing to a grounded line or a sensor that pulls its output down. It is not described publicly by any manufacturer. The documented counterpart on channel A is Mitsubishi's P07EA (2022 service manual for a CVT with electric shift): an input under 0.6 V on one of the eight selector sensors for 2.4 s sets it, the cause being a grounded or open sensor line, and the vehicle keeps driving normally. With shift-by-wire there is no mechanical link to fall back on, so redundant channels matter. Look for pinched wiring under the console. The sensor B counterparts in GM's internal range selection are P27F1 and P27F2.
Possible causes
- Harness pinched under the center console, shorted to ground high
- Selector sensor output shorted internally medium
- Sensor supply interrupted, output drops to zero low
Symptoms
- Shift system warning on the display
- Usually no change in how the car drives
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P27E9
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.